A study of paleomagnetic remanence and anisotropy of magnetic susceptibility (AMS) has been performed on the Öje-Diabase in Dalarna, Sweden, and on basic dikes associated with the alkaliquartzsyenite/granite Noran-pluton in central Sweden. Based on isolation of directions of characteristic magnetization in the basic rocks, a division into three different groups (A,B,C) has been made. Group Aconsists of dolerites of Jotnian origin, both dolerites from the Öje-Diabase and dikes associated with the Noran-pluton are included in this group, making them coeval. Group B is suspected to show a re-magnetization from the later part of the Svekonorwegian orogeny. Group C belongs to the Blekinge-Dalarna-Dolerites (BDD). Thermal demagnetization of dolerites revealed two different types of demagnetization behaviours, one where magnetite clearly was the source of the remanence, and an other with a linear decrease in magnetization intensity. The measurements of magnetic anisotropy reveals a magnetic fabric with an almost horizontal foliation and a lineation that indicates a fairly uniform NNW/ S-SE flow direction of the magma..

In this project a method used for performing accurate simulations on magnetization dynamics based on constrained field density functional theory has been validated and used for performing computations on a few magnetic materials. The method has been shown to simulate systems consisting of iron well, but there are still problems with simulations of alloys containing both magnetic and non-magnetic materials..

This has been a thesis work for an bachelor degree at Umeå university. The work has been done at LKAB?s facilities in Kiruna and its main purpose has been to investigate and construct some conceptual designs for replacing a screen with magnetic separation in KA3 concentrator plant. First all information available about magnetic separation was gathered and studies of magnetic separation at the sorting plant and studies of the plant KA3 was conducted. Companies that manufacture magnetic separators were contacted.

This thesis describes a method of measuring axial magnetic leakage flux in an operational hydropower generator. Axial magnetic leakage flux is the magnetic flux at the ends of a rotating generator, which goes through the stator parallel to the rotor axis. This flux can cause circulating currents in the stator iron, giving rise to losses, and can in the worst case overheat a generator, causing it to melt down. To measure the axial flux, and how it affects the generator temperature, a measurement system was constructed on behalf of Vattenfall. The system consists of search coil sensors and a signal-processing unit with amplifiers and active filtering.  To confirm the behaviour of the axial leakage flux and the functionality of the measurement system, a test installation was made.

With a growing population on earth the amount of end-of-life vehicles (ELVs) and other scrap steel increases. The European Directive 2000/53/CE? requires a minimum of 95 % reuse and recovery and 85 % re-use and recycling no later than 1 January 2015, for end-of life vehicles. This imposes a need for more efficient recycling and recovery. Despite this shredder residue (SR) is commonly land filled.This report investigated the magnetic fines residue generated at Stena Metall shredder facility in Halmstad, Sweden.

With a growing population on earth the amount of end-of-life vehicles (ELVs) and other scrap steel increases. The European Directive 2000/53/CE? requires a minimum of 95 % reuse and recovery and 85 % re-use and recycling no later than 1 January 2015, for end-of life vehicles. This imposes a need for more efficient recycling and recovery. Despite this shredder residue (SR) is commonly land filled.This report investigated the magnetic fines residue generated at Stena Metall shredder facility in Halmstad, Sweden.

Development in spin dynamic occurs in the whole world because of therising demands on fast electronic storage for example hard drivesand RAM (Random Access Memory). Measuring the spin resonance of amaterial gives you the insight of the theoretical speed for amagnetic memory. This means the maximum storage speed is below thefirst resonance. All magnetic materials have different propertiesthat will inflict the resonance frequency which brings that theconstructors of memories need to know which magnetic material theywill use to obtain best results. In the market for normal users themaximum storage speed in a RAM memory is 1.6 GHz.

In this report a new gear concept is evaluated using the magnetic finite element method (FEM)software MagNet and Ansys as well as the mechanical FEM software Abaqus. The gear conceptis evaluated in terms of maximum torque capability, torsional stiffness, gear ratio and efficiency.ABB Corporate Research has proposed a new gear concept which should be less expensive thangearboxes used today. The new concept is called aMagnetic Harmonic Traction Drive and usesthe principles of a harmonic drive gear to achieve a high reduction ratio. The gear conceptreplaces the wave generator used in traditional harmonic drives with magnets and uses tractioninstead of gear teeth to transfer the torque. The main components in the gearbox are the magnets,the flexspline, the magnetic portion and the circular spline.

Boplatsvallar, often translated as semi-subterranean settlements, is an ancient monument with a diffuse definition. Defined as ?embankments that partially or completely surround a often lowered/dug down surface- this category of ancient monuments is also made up of a former category which traditionally was interpreted as winter settlements from the late Stone age in Sweden. This view of the ancient monuments carried over, to a certain extent, to this new definition. Should this be the case, that this category of ancient monuments are remains of winter settlements,  used recurringly over an extended period of time, then they should exhibit similar signals in regards to the distribution of the anthropogenically altered soil chemical and soil physical properties at the sites.The area around Lillsjön, Anundsjö parish in Ångermanland, have four boplatsvallar located separately in the regional area.

The purpose of this thesis was to investigate different methods do measure velocity of pistons in pneumatic cylinders at Bosch Rexroth Teknik AB. Through information of velocity the adjustment of a cylinders damping can be done easier.A future transducer will be used by salesmen, service personnel and customers. This requires a sensor that is easy to apply and use. It is also desirable that the sensor is cheap. A number of possible methods to measure velocity have been presented.

Boplatsvallar, often translated as semi-subterranean settlements, is an ancient monument with a diffuse definition. Defined as ?embankments that partially or completely surround a often lowered/dug down surface- this category of ancient monuments is also made up of a former category which traditionally was interpreted as winter settlements from the late Stone age in Sweden. This view of the ancient monuments carried over, to a certain extent, to this new definition. Should this be the case, that this category of ancient monuments are remains of winter settlements,  used recurringly over an extended period of time, then they should exhibit similar signals in regards to the distribution of the anthropogenically altered soil chemical and soil physical properties at the sites.The area around Lillsjön, Anundsjö parish in Ångermanland, have four boplatsvallar located separately in the regional area.

The thesis was performed at the lighting company Zpecta AB. Zpecta needed to develop alternative attachment of their LED-luminaire Capella. Today Capella attaches in metal ceilings with four magnets. Zpecta got indications from their customers that there was a need for other attachments. The purpose is to determine the customer?s requirements and the interfaces that are considered for Capella.During the thesis, Capella was only on the market for testing and evaluation.The thesis was initiated to create a specification.

The purpose of the present study was to examine effects of driver, vehicle, and environment characteristics on Collision Warning System (CWS) design. One hypothesis was made that the capability of collision avoidance would not be same among a driver, vehicle, and environment group with different characteristics. Accident analysis and quantitative analysis was used to examine this hypothesis in terms of ?risk? and ?safety margin? respectively. Rear-end collision had a stronger focus in the present study.

The purpose of this study was to evaluate the effect of bilateral repetitive transcranial magnetic stimulation (rTMS) on language ability in eight participants with aphasia. All participants underwent two periods of treatment and five periods of evaluation. During one treatment period high frequency stimulation was given to the left hemisphere and low frequency stimulation to the right and in one other period placebo stimulation was given. Boston Naming Test and Token Test were used to assess the effects of treatment on naming ability and language comprehension. Results showed that no significant effects were found on group level.

Each year, Heterobasidion spp. is a major cause of economic losses to forestry in the northernhemisphere, including Sweden. New results indicate that pre?commercial thinnings could be at riskfor Heterobasidion spp. infections.